A temperature between 120f and 125f is ideal for most situations. How to adjust the temperature on an electric water heater.
For safety turn off circuit breaker to your water heater and make sure the power is shut off to your water heater before adjusting the temp.
How to adjust temperature on electric hot water heater.
Start by turning off power to the water heater at the circuit breaker.
Consult the owners manual that came with your water heater for instructions for your particular model.
Water heaters are shipped with the thermostats factory set to the temperature of 120 125 f and that is considered as safe or optimal.
Peel back the insulation.
Before you make an adjustment to the water heater check the temperature of the hot water as it comes out of a faucet closest to the water.
Find the access panel for the thermostats and use a screwdriver to remove the panel.
An electric water heater has two heating coils one each at top and bottom and.
If your water heater.
How to change the temperature on your electric water heater.
Use a flathead screwdriver to adjust the thermostat up or down.
The water heater is built to produce hot water with the temperature ranging from approximately 80 f to 160 f or higher when used in commercial applications.
Heres general instructions for how to adjust an electric water heaters thermostats there are two one at the bottom and one at the top.
Usually 2 covers one on the top for the top.
Gas or electric water heaters.
/cdn.vox-cdn.com/uploads/chorus_image/image/66391087/rinnai_garage.0.png)
No comments:
Post a Comment