For instance try using the wall switch instead of the remote. So here is the step by step guide on how to fix a garage door sensor.
They should be at each side of the garage door near the ground.
How to align garage door sensors.
The light on your garage door might blink three times afterward which is another way that you can tell the sensors need to be adjusted.
Making sure that the sensors are in the right place is relatively easy.
Firstly youll need to cut off the power to your garage door properly.
Test your garage door to see if it works.
Evaluate the situation and perform one more test of the door.
Locate your garage door sensors.
Loosen the nut holding the blinking sensor in place.
Garage door sensors are placed on both sides of a garage door.
Between these sensors there is a beam of light or a laser which is continuously flowing.
Tighten and level the sensor so its even with the other one.
You now need to check that the string is level between the two brackets.
If nothing works press and hold the wall switch until the door shuts down.
You can also check the led lights on each of the garage door sensors.
How to align garage door sensors adjusting the sensors see if 1 of the 2 sensors displays a blinking light.
Repeat the adjustment process.
No comments:
Post a Comment