Loosen the lock nut by clamping it with the pliers or wrench and turning it counterclockwise as far. Fit a socket wrench over the adjustment nut on the top of the valve.
Direct acting valves are the more popular water pressure reducing valves consisting of globe type bodies with a spring loaded heat resistant diaphragm connected to the outlet of the valve that acts upon a spring.
How to adjust pressure reducing valve water.
As their name would suggest pressure reducing valves control the flow of water into your home.
The first thing you need to do is find the valve.
The line and valve may be in the basement crawlspace or.
Turn the nut counterclockwise to reduce the pressure downstream from the valve and clockwise to increase it.
Without a pressure reducing valve this water would travel through your plumbing at a rate unsuitable for residential use.
To set your water to your preferred pressure you need to adjust the pressure regulator valve.
The watts workshop experts walk you through this quick fix including the tools youll need and the step by step procedures.
Parallel pressure reducing valveswater pressure regulators can be installed one set at a higher psi flow rate than the other.
There are two types of water pressure reducing valves direct acting and pilot operated which use globe or angle style bodies.
It is a fairly easy process that has big results.
Change the water pressure in your home by adjusting the water pressure reducing valve to recommended house water pressure.
Turn the screw in a clockwise direction to increase the water pressure and a counterclockwise direction to decrease water pressure.
Step 3 adjust water pressure.
Now that the screw is loosened you can either turn it clockwise.
Position the jaws of the wrench over the top nut of the adjustment screw.
For example installing a watts model 223 pressure reducer set at 50 psi in parallel with a second watts 223 pressure reducer set to 60 psi will allow increased total water flow capacity during periods of peak water demand.
How to adjust a pressure reducing valve.
Open a water faucet to test the pressure.
The pressure regulator valve is usually located on the water supply line either in your basement or crawlspace or in the box with your water meter.
Make the adjustment one or two full revolutions at a time.
How to adjust a water pressure reducing valve step 1 find the valve.
Loosen the lock nut on the pressure reducing valve with a wrench and back it off by unscrewing it.
You may need to adjust your water pressure reducing valve.
Step 2 loosen the screw.
Using pliers or a wrench you can loosen the nut.
Find the pressure reducing valve.
Locate the supply line coming into your house.
Water heaters in phoenix are typically capable of handling pressure lower than 80 psi.
No comments:
Post a Comment