Clean the glass thoroughly making sure you get in the corners and around. As you separate the film from the liner spray it with a soap and water mixture.
Squeegee from the top down the center and then from the center to one side using firm overlapping strokes and pushing bubbles to within 2 inches of the glass edge.
How to apply window film.
When the film is smooth the excess film can be trimmed.
Handle the film carefully at the corners to avoid wrinkles or creases which cannot be removed.
For window film go to.
Do the same on the other side of the film.
Apply the window film to the glass.
Use a credit card to remove air bubbles working from the middle out to.
Whether it is a window door or wall you need to take a few steps before applying the slick piece of film.
Use your hands to smooth the film onto the glass.
Cut the pieces of film so they measure about 12 larger than the window panes being covered.
Cut window film to the size needed.
Spray the film with solution.
Apply the adhesive side of the film to the wet glass.
The films are then ready to be applied to the window with the adhesive side towards the window.
Mix up a solution of soap and water in a spray bottle.
Wash the area well with soap and water if it is truly grimy.
Spray the mixture on the door or window glass.
Cut and apply the film.
To smooth out any bubbles or imperfections its generally recommended to use a squeegee and possibly more wetting solution to get a consistent look.
Follow these steps for application.
Apply the plastic sheet on top of the wet film then use masking tape strips to secure the bag around the inside of the window frame.
Push any large bubble out to the edges with your hand.
30 60 gal trash bag cut to size.
Spritz the window pane with clear water remove the backing from the film and stick the film to the window.
To apply window film to glass doors or windows.
Spray the solution onto the top of the film then cover the entire glass area with a precut plastic sheet ie.
Things even a monkey should know is a weekly show about things everyone should know about doing fixes around the house yard and cars.
This video segment will show you how to install window film in your home or business.
You can achieve professional results with a great cost savings by doing it yourself.
This week i am putting detective window film on my windows.
Give it a pass with glass cleaner or a mild cleaning solution until the paper towel or rag comes away clean.
The water makes it easier to position the film and helps hold it on the window.
Before applying window film.
Measure and cut the film about an inch larger than the dimensions of the glass youre covering.
Start at the top of the window then allow the film to gently lay down onto the glass.
No comments:
Post a Comment