Loosen the inner collar on the pin to adjust the horizontal position. If you are hitting left then follow the arrows by moving the sight block left.
Look down the sight at the top pin and shoot your arrow at the target.
How to adjust bow sight if shooting left.
If youre shooting left move your pin.
It always shot great.
Move the individual sight pins to adjust elevation.
If your arrows group to the left move your sight to the left.
Your first adjustments shift the horizontal plane.
Well in june of last year i put new strings on the bow.
Related articles step 1.
Cabelas pro staff and producer of destination extreme brian godfrey gives you tips on how to best adjust your bow sight.
Continue the process of shooting.
If arrows hit high raise the sight pin to lower the point of impact.
Start at the 20 yard line and shoot three arrows into the target using the top pin.
Move the pin toward the arrow group to adjust the sight.
When it reads level in all possible positions your bow sights 3rd axis is set and youre ready to shoot.
If your bow is shooting to the right follow the arrow by moving the sight block to the right.
Sight in at one distance at a time and if you get tired take a break or finish the next day.
Notice where you are hitting.
After doing this i only had 18 left of left adjustment.
Stand so that your body is perpendicular to the target and draw an arrow back with your bow.
Set your 20 yard first pin.
Well in august i broadhead tuned and tweaked the rest and site to get it to tune.
Next adjust your sight to achieve accuracy.
I corrected this problem but now my arrows fly too far to the left and my bows sight wont move far enough left to compensate.
So i tweaked the sight to get it to shoot proper.
After the strings were put on it wanted to shoot to the left by 6 maybe more.
I recently tuned this bow and found the center shot to be far off.
To remember which way to move your sight imagine adjusting it until it covers your group.
Go to your range and shoot uphill and downhill shots.
If arrows are hitting low move the pin down to raise the point of impact.
Currently i have a 2006 bowtech with a tru glow 3 pin sight.
If your arrows hit to the right move your sight to the right.
Adjust the sight in or out until the sight reads level at the upward and downward position.
If its not your form and the bow is tuned then the cause is most likely your riser having a lot of offset at the shelf all newer bows do and a lot of newer sight companys dont take that into consideration and havent put enough movement in there sight plane.
I have always had a problem with sighting in my compound bows.
Move to the closest distance to the target which is usually the 10 yard 91 m mark.
No comments:
Post a Comment