Use a screwdriver to back out the screws located above and below. Standard sliding glass doors all have tracks.
Most sliding doors have a mechanism called an adjusting screw located at the bottom of the door ends.
How to adjust sliding glass door strike.
Using a putty knife remove the strike plate to expose the adjustment screw.
Over time the sliding glass door track accumulates dirt and grime.
If the door becomes even harder to open turn the screw in the opposite direction.
Before you begin the sliding door adjustment process make sure the track is clean.
In this jeld wen customer care video youll.
The strike plate can move up and down accordingly.
Turning this screw raises or lowers the roller.
Give the screw a clockwise turn and test to see whether the door slides easier.
Sometimes dirt and grime build up in the track causing the door to stick as it slides.
Locate the adjustment screws on the lower edges of the door.
Clean the sliding glass door track.
The track acts as a guide for the door and also allows roller wheels to help the door run smoothly.
You can alter the height of these rollers by accessing the adjustment screws which are set into slots on the doors outer edges perpendicular with the rollers themselves.
This slows down your door considerably.
Using an old toothbrush or a small wire brush scrape any dirt and debris off the track and dry with a soft cloth.
Most sliding glass doors contain two sets of rollers one on each side of the bottom of the door.
If a patio door is difficult to operate wont lock properly or is loose or drafty make adjustments to the roller latch or strike to fix the issue.
Https Www Assaabloyglass Us Local Assaabloyglassus All 20glass 20entrances Library Catalog Assaabloy Glasssolutions Catalog Pdf
No comments:
Post a Comment