In this video i am showing how i used a aprayer to apply thopson water seal to a deck. Make your masonry beautiful.
Cover plants and shrubs.
How to apply thompsons water seal to brick.
Thompsons water seal uses a unique micro silicone emulsion to stop water penetration.
Mixin thompsons water seal and stain fer ur deck duration.
For best results we would recommend a dedicated preserver to protect exterior timber from rot.
To use mineral spirits wipe the spirits over the area with a cloth.
Perform the splash test.
Let it sit for a few minutes then scrub the area with a scrub brush.
You can also perform the splash test by splashing water against the surface.
Apply a sealer to your exterior brick for protection against water damage and minimize moss growth.
To use a concentrated degreaser follow the instructions on the label of your selected product.
If water absorbs and darkens color of substrate within five seconds surface is porous and considered ready to be treated.
How to fix repair protect and seal a felt roof and flat roof using everbuild black.
Todd maynard 942 views.
Clean the brick and allow it to dry completely.
If the surface flakes and crumbles its already been.
However you must wait for the first coat to dry typically about 2 hours and apply the second coat within 4 hours of applying the first coat.
Thompsons waterseal products typically need only one application but you can apply a second coat of stain to darken the wood if desired.
The key is to read the labels carefully before choosing which thompsons water seal is right for your water damage protection project.
Applying thompsons water sealant to a chimney part 1.
You can apply some of thompsons water seal products to damp wood but some of the other products require the surface to be dry for 48 hours prior to staining.
Sprinkle water on various sections of surface to be sealed.
If the area becomes dramatically darker or.
Applying water seal will not damage wood but the level of waterproofing protection will vary depending on the type of wood being treated.
Apply a top quality sealer using a pump sprayer.
Steps to remove the sealant.
Penetrating brick sealer deco 30.
Take a knife and scrape along the edge of a brickmasonry wall concrete patio or driveway.
If water beads up or otherwise sits on top of surface then surface does not need protection at this time.
No comments:
Post a Comment