The home water pressure regulator reduces the amount of water pressure entering the home from a municipality. Or bigger copper or plastic water main coming into your house consider installing a water pressure booster.
Check the faucets in the house to see if there is a change in the pressure compared to before.
How to adjust water pressure in house.
In this quick video we show you how to test your homes water pressure and how to adjust water pressure down or up at the water pressure regulator.
If the water pressure is too high it could result in leaks and toilets running all the time.
Decreasing water pressure saves water and reduces your water bill.
Find out how to change it.
Is your water pressure too high or too low.
Step 4 check the pressure.
Note that i got the direction wrong.
If your water department cant deliver more pressure and you have a 34 in.
Increasing water pressure too high can cause older pipe fittings to loosen break or leak.
The adjusting nut on a water pressure valve is a left hand nut.
These tips come in handy when your homes water.
It takes the water coming in from the street and increases its pressure by means of an electric pump and a pressure tank.
Once you have adjusted the screw the water pressure should be regulated.
Depending on your location and distance from the municipal water source incoming pressure can range from 80 pounds per square inch psi to 150 psi.
You want to turn counter clockwise to decrease pressure and clockwise to increase.
Turning it clockwise increases water flow and counterclockwise decreases water flow.
:max_bytes(150000):strip_icc()/93097679-56a73c295f9b58b7d0e81657.jpg)
No comments:
Post a Comment